Plastic lockers are the ideal solution for locations where moisture, rain or intensive use play a role. Unlike steel lockers, plastic lockers cannot rust; they are completely waterproof and exceptionally impact-resistant. This makes them perfect for outdoor areas, swimming pools, beaches, campsites, sports complexes, events and festivals.
LockerSpecialist supplies high-quality polyethylene lockers. They are resistant to rain, sunlight, chlorine, sand, frost and daily intensive use. With smart ventilation, fresh colours and a practical layout, these lockers offer a representative and maintenance-free storage solution for any environment.
30 | 38 | 49
25 | 46 | 67 | 88 | 109 | 130 | 151 | 172 | 193
30 | 45 | 48 | 58
1 to 3 doors
2 to 4 columns
The FSP plastic lockers are completely waterproof and can easily be placed in damp rooms or directly outdoors in all weather conditions. They neither rot nor rust and are easy to clean, even with pressure washing. Ideal for swimming pools, shower rooms, wellness areas and wet leisure facilities. Perfect for temporary or permanent outdoor use. Lockers can be placed with or without a roof and remain safely dry, even during rain showers.
The lockers are produced from polyethylene plastic with a UV8 rating. This means that the colours remain stable for a long time, even when exposed to sunlight during festivals, outdoor locations or sporting events.
Resistant to chlorine, moisture, condensation and wet bathing suits. Ideal for pool changing rooms, showers, fitness clubs and wellness areas.
Suitable for long-term outdoor use, playgrounds, schools and campsites. Lockers provide safe storage for bags, clothing or electronics.
The FSP plastic locker is equipped with a robust padlock hasp. The metal bracket is attached to the cabinet and goes through the door, creating a strong, tamper-resistant closure. Cylinder locks, mechanical combination locks and electronic locks are also available on request.
Check out our page Locker locks for an overview of all available slot options.
The products in the category Plastic lockers are rated by our customers at based on 9 reviews.
The colours of the materials in RAL code are given for indication only. The displayed decorations may differ from the actual colours depending on the settings of your display.
Do you have any other colours? There are many other colours possible. Please contact us for this.
According to our locker specialist
We design, manufacture and install lockers to order. Together, we determine the layout, materials and finish that best meet your requirements. Would you like a solution tailored to your organisation? Book a free consultation and explore the possibilities.
We deliver your project safely and install it professionally on site. Our team manages the complete process, from transport through to a tidy, ready-to-use handover.
Contact us
Polyethylene lockers are developed for long-term outdoor use and remain stable in rain, frost, sunlight and heat. Please note that some locking systems are less suitable for coastal areas with salt and sea air, so we recommend specific slot variants.
Yes, polyethylene is completely waterproof and can be sprayed or cleaned without any problems with a pressure washer. The material does not absorb moisture and remains in shape after cleaning.
Yes, polyethylene is very impact-resistant and resistant to sand, bumps and rough treatment. Only some slot variants are less suitable for severe coastal wind and salt exposure.
Yes, polyethylene lockers can be connected and stacked. This makes them ideal for temporary and permanent settings, even on uneven surfaces such as grass or gravel.
Yes, polyethylene lockers can be anchored to floor, wall or solid surface. This is especially useful in busy outdoor locations or places with lots of wind.
By default, polyethylene lockers come with a padlock bracket, but they can also be expanded with cylinder locks, mechanical combination locks or electronic lock solutions. The construction of polyethylene supports all these variants.
Yes, polyethylene is completely resistant to salt, chlorine, condensation and moisture. Only some metal locks are less resistant to salt-laden coastal air.
Yes, polyethylene lockers are UV-resistant and retain their colour even with long-term outdoor use. This results in less rapid bleaching or discolouration than with other materials.
Polyethylene is a strong, water-resistant and impact-resistant plastic that does not rust or readily deform and requires very little maintenance. The material is ideal for lockers that are intensively used in outdoor and humid environments.
Yes. We can produce an initial design or layout proposal based on your wishes, the space and the type of use. If desired, we can supply technical drawings and 3D visualizations.
Our showroom is in Elst, the Netherlands. The address where you can visit our locker showroom is: Elsterstraatweg 31A, 3922 GD Elst, the Netherlands. Contact us to arrange a showroom appointment.
Yes, we welcome you to our showroom in Elst, the Netherlands. This is also possible outside normal office hours. Please contact us to schedule an appointment.
Yes. We offer service and maintenance on site, both for mechanical locks and electronic systems. For smart lockers we can also provide periodic remote management and support.
We deliver the lockers directly from our central storage or directly from the factory. Transport is handled by professional logistics partners who have experience in furniture transport, so that the products arrive safely and undamaged.
This varies by project. Steel and HPL lockers are often delivered fully assembled. Washroom partitions are generally supplied as a kit and assembled on site by our installation team.
Yes, we almost always provide installation by experienced installers. In larger projects we plan this in consultation with the contractor, facility team or project manager. Our installation specialists are ready for you.
After agreement on the offer you will receive a clear schedule. For larger projects this is aligned with the contractor, facility management or project management. We take into account building phases, delivery dates and accessibility of the location.
Yes. By arrangement, installation can take place during evenings or weekends. This is useful for schools, healthcare facilities and offices that remain occupied during normal working hours.
Yes, if desired, we can disassemble and remove existing lockers or walls. We include this as a separate item in the quotation.
Yes. For LoQit, Digilock, Nextlox, Pareva and other electronic systems we provide both hardware installation and technical commissioning. We coordinate software configuration and user management with the client and the relevant technology supplier.
Depending on the manufacturer and materials the delivery time is between 5 - 8 weeks. Selected ranges may be available sooner, typically within 3–4 weeks. Delivery times are indicative and no rights can be derived from them. In the quotation we always mention an actual delivery time.
Yes. Once your order is confirmed, you will receive a schedule with expected delivery week. We will keep you informed when the production or transport changes.
For project orders we use a clear payment schedule. Because it is often customised, we work with a deposit when the order is placed and the rest after delivery or installation. This is always mentioned in advance in the quotation so that you know exactly what to expect.
You always receive an invoice in advance for the deposit. Once the products are delivered or assembled, you will receive the final invoice. For larger projects we work with partial payments.
You can pay by bank transfer. For business customers we do not work with online payment methods such as iDEAL because we deliver custom projects without a webshop.
Payment on account is possible for permanent business customers or when this has been agreed in advance. New clients usually pay a deposit.
Extensive range of lockers and washroom partitions